MIK-PH6.0 pH ORP meter

MIK-PH6.0 Online pH meter is a multivariable analyzer used for measuring/controlling the pH and ORP with different temperature. The function is switchable on the device itself. Depending on the measured variable, combination electrodes (e. g. pH sensors) or split versions (glass electrodes with a separate reference electrode) can be readily connected.
In terms of applications, the pH 6.0 online pH meters are commonly used in industrial settings where pH control is critical, such as in chemical processing plants, water treatment plants, and food and beverage production facilities. They are often used to monitor the pH of chemical solutions, wastewater streams, and food and beverage products to ensure that they meet specific pH requirements.


Measure range: pH: 0-14 pH, ±0.02pH; ORP: -1000 ~1000mV, ±1mV

Input Resistance: ≥1012Ω

Power supply:  220V±10%,50Hz/60Hz

Output: 4-20mA, RS485, Modbus-RTU, Relay


  • Introduction

pH / ORP meter is one of the intelligent online chemical analysis equipment, is a widely used in thermal power, chemical fertilizer, metallurgy, environmental protection, Pharmaceutical, biochemical, food and tap water solution pH value or ORP value and temperature of the continuous monitor.

Continuous monitoring data through the transmission output connection recorder to achieve remote monitoring and recording, you can also connect the RS485 interface through the MODBUS-RTU protocol can be easily connected to the computer to achieve monitoring and recording.

  • Characteristics

  • Design of board card modularity, for convenience of assembly and configuration.

  • 2.4 inches 128*64 lattice screen.

  • Isolating transmitting output, with little interference.

  • Isolating RS485 communication.

  • Can be pH / ORP measurement, temperature measurement, upper and lower limit control, transmission output, RS485 communication.

  • Configurable manual and auto temperature offset function.

  • Configurable upper/lower limit warning and delay.

  • Configurable hummer and LCD backlight switch.

online pH meterMIK-PH6.0 pH ORP meter

  • Factory

Supmea online pH meter applicationSupmea online ph meter useSupmea online pH meter applicationsMIK-PH6.0 pH ORP meter

  • Description

Meacon sixth-generation ph meter with 20 years of experience accumulated. 

Supmea ph meter controller

  • Applications

MIK-PH6.0 pH ORP meterMIK-PH6.0 pH ORP meterMIK-PH6.0 pH ORP meter

  • Specification

  Product   pH meter, pH controller
  Model  MIK-PH6.0
  Measure range  pH:    0-14 pH, ±0.02 pH
   ORP: -1000 ~1000mV, ±1mV
  Measuring medium  Liquid
  Input Resistance  ≥1012Ω
  Temp compensation  Manual/ Auto temperature compensation
  Temperature Range  -10~130℃, NTC10K or PT1000
  Communication  RS485, Modbus-RTU
  Signal output  4-20mA, maximum loop 750Ω, 0.2%FS
  Power supply  220V±10%, 24V±20%, 50Hz/60Hz
  Relay output  250V, 3A

Need more information?

Contact us for more details about our boilers,solutions and services