MIK-RD905 Solid material radar level meter

MIK-RD905 Radar level meter with high frequency, measurement of Solid particles, powder constant of the best choice.


  • Range: 0~30 m
  • Accuracy: ±10mm 
  • Application: Solid particles, powder
  • Frequency Range: 26GHz


  • Product Details

The MIK-RD905 radar level meter is an advanced device used to measure the level of liquids or solids in a container. It uses radar technology to measure the distance between the device and the surface of the material in the container. The radar sends out a microwave signal that reflects off the material and returns to the device. The device then calculates the time it took for the signal to return and uses this to determine the distance between the device and the material.

Radar level meters are particularly useful in industries such as oil and gas, chemical processing, and wastewater treatment, where accurate level measurement is crucial for safety and efficiency. They can measure levels in both pressurized and non-pressurized vessels, and are unaffected by factors such as temperature, pressure, and vapor. They are also easy to install and maintain, making them a popular choice for many industries.

Overall, the radar level meter is a highly accurate and reliable device that plays a crucial role in ensuring the safe and efficient operation of various industrial processes.

  • Specification

 Product  Radar level meter
 Model MIK-RD905
 Measure range 0-30 meters(liquid); 0-20m(solid particles); 0-15m(solid power)
 Application Solid particles, powder
 Process Connection Thread, Flange
 Medium Temperature -40℃~250℃
 Process Pressure    -0.1-4.0 MPa (flat flange); -0.1 ~ 0.3 MPa (universal flange)
 Accuracy ±15mm 
 Ingress protection IP67 
 Frequency Range 26GHz
 Signal Output 4-20mA (Two-wire/Four)
 Power supply 2-wire (DC24V)/ 4-wire (DC24V /AC220V)



  • Introduction

radar level meter Supmea

  • Product Size

radar level meter size

  • Installation guide
radar level meter manufacturer radar level meter supplier radar level meter factory
Be installed in the diameter of the 1/4 or 1/6.    Note: The minimum distance from the tank  wall should be 200mm. Note:  ① datum  ②The container center or axis of symmetry The top conical tank level, can be installed at  the top of the tank is intermediate, can guarantee  the measurement to the conical bottom  A feed antenna to the vertical alignment surface.    If the surface is rough, stack angle must be used   to adjust the angle of cardan flange of the antenna   to the alignment surface.    (Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.)


Need more information?

Contact us for more details about our boilers,solutions and services