MIK-RD902 26GHz Radar level meter

MIK-RD902 Non-contact radar level meter with simple commissioning, trouble-free operation saves time and money. For usage in a wide range of applications - be it in simple storage tanks, in corrosive or aggressive media or high accuracy tank gauging applications.


  • Range: 0~30 m
  • Application:  Liquid
  • Frequency Range: 26GHz


  • Introduction

This series of radar level meter adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 70 meters. Antenna is optimized further processing, the new fast microprocessors have higher speed and efficiency can be done signal analysis, the instrumentation can be used for reactor, solid silo and very complex measurement environment.

  • Technical Parameters

 Product  Radar level meter
 Model MIK-RD902
 Accuracy ±5mm (range 5m)
±10mm (range 20m)
±15mm (range 30m)
 Application Liquid
 Process Connection Thread, Flange
 Medium Temperature -40℃~130℃ (Standard type), -40℃~250℃ (High temp type)
 Process Pressure    -0.1~4.0MPa
 Protection Grade IP67
 Frequency Range 26GHz
 Signal Output 4-20mA/HART (Two-wire/Four)
 Power supply DC(6~24V)/ Four-wire
DC 24V / Two-wire
  • Product Size


Supmea radar level meter

  • Radar level transmitter installation
radar level meter for sale radar level meter whoelsale radar level meter installation
Be installed in the diameter of the 1/4 or 1/6.    Note: The minimum distance from the tank  wall should be 200mm.
Note:  ① datum    ②The container center or axis of symmetry
The top conical tank level, can be installed at  the top of the tank is intermediate, can guarantee  the measurement to the conical bottom A feed antenna to the vertical alignment surface.    If the surface is rough, stack angle must be used   to adjust the angle of carbon flange of the antenna   to the alignment surface. (Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.)

Need more information?

Contact us for more details about our boilers,solutions and services