MIK-RD901 Radar level meter for corrosive liquid

MIK-RD901 Non-contact radar with simple commissioning, trouble-free operation saves time and money. PTFE sensor material, for usage in a wide range of applications - be it in simple storage tanks, in corrosive or aggressive media or high accuracy tank gauging applications.


  • Range: 0~10 m
  • Application:  Corrosive liquid
  • Frequency Range: 26GHz


  • Introduction

This series of radar level meter adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 70 meters. Antenna is optimized further processing, the new fast microprocessors have higher speed and efficiency can be done signal analysis, the instrumentation can be used for reactor, solid silo and very complex measurement environment.


  • Specification
 Product  Radar level meter
 Model MIK-RD901
 Accuracy ±5mm(range 5m)
±10mm(range 10m)
 Application Corrosive liquid
 Process Connection Thread, Flange
 Medium Temperature -40℃~130℃
 Process Pressure    -0.1~0.3MPa
 Protection Grade IP67
 Frequency Range 26GHz
 Signal Output 4-20mA
 Power supply DC(6~24V)/ Four-wire
DC 24V / Two-wire
  • Product Size

901 radar level meter size


  • Installation guide

901 radar level meter intall in tank

Be installed in the diameter of the 1/4 or 1/6.   The minimum distance from the tank  wall should be 200mm.

Note:  ① datum ②The container center or axis of symmetry

901 radar level meter intall in tank

The top conical tank level, can be installed at the top of the tank is intermediate, can guarantee the measurement to the conical bottom

 radar level meter intall in tank

A feed antenna to the vertical alignment surface.  If the surface is rough, stack angle must be used  to adjust the angle of cardan flange of the antenna to the alignment surface. 


Need more information?

Contact us for more details about our boilers,solutions and services