MIK-RD906 26GHz Tank radar level meter

MIK-RD906 26GHz Tank radar level meter with high frequency, measurement of solid and low dielectric constant of the best choice.


  • Range: 0~20 m
  • Accuracy: ±3mm 
  • Application:  Tank
  • Frequency Range: 26GHz


  • Specification

 Product  Radar level meter
 Model MIK-RD906
 Accuracy ±10mm (range 10m)
±15mm (range 20m)
 Application Tank
 Process Connection Thread, Flange
 Medium Temperature -40℃~150℃
 Process Pressure    Normal pressure
 Accuracy ±10mm~±15mm
 Protection Grade IP67 
 Frequency Range 26GHz
 Signal Output 4-20mA (Two-wire/Four)
 Power supply DC(6~24V)/ Four-wire
DC 24V / Two-wire
  • Introduction

radar level meter


  • Product Size

tank radar level transmitter


  • Installation guide
level meter tank level meter tanks level meter soild
Be installed in the diameter of the 1/4 or 1/6.    Note: The minimum distance from the tank  wall should be 200mm. Note:  ① datum  ②The container center or axis of symmetry The top conical tank level, can be installed at  the top of the tank is intermediate, can guarantee  the measurement to the conical bottom   A feed antenna to the vertical alignment surface.    If the surface is rough, stack angle must be used   to adjust the angle of cardan flange of the antenna   to the alignment surface.    (Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.)

Need more information?

Contact us for more details about our boilers,solutions and services