MIK-110T Economic 3-digit Single-loop Digital Display Controller

Economic 3-digit Single-loop Digital Display Controller is in modular structure, easily operable, cost-effective, applicable in light industry machinery, ovens, laboratory equipment, heating/cooling and other objects in the temperature range of 0~999 °C.

Characteristics

Double four-digit LED display;

5 types of dimensions available;

Standard snap-in installation;

Power supply: AC/DC100~240V (Frequency50/60Hz) Power consumption≤5W; DC 12~36V Power consumption≤3W

Specification

Product	Digital Single-loop digital display controller
Model	MIK-110T
Display	Dual-screen LED display
Dimension	C. 9696110mm D. 9648110mm E. 4896110mm F. 7272110mm H. 4848110mm
Measurement accuracy	±0.3%FS
Analog output	Analog output----4-20mA, 1-5V(RL≤500Ω), 1-5V (RL≥250kΩ)
Alarm Output	With upper and lower limit alarm function, with alarm return difference setting; Relay contact capacity： AC125V/0.5A(small)DC24V/0.5A(small) (Resistance C load) AC220V/2A(big)DC24V/2A(big) (Resistive load) Note: When the load exceeds the relay contact capacity, please do not directly carry the load
Power supply	AC/DC100~240V (Frequency50/60Hz) Power consumption≤5W DC 12~36V Power consumption≤3W
Use environment	Operating temperature(0~50℃) Relative humidity: (5~85%)RH

Introduction

single-loop-digital-meter

digital meter

Economic 3-digit Single-loop Digital Display Controller is in a modular structure, easily operable, cost-effective, applicable in light industry machinery, ovens, laboratory equipment, heating/cooling and other objects in the temperature range of 0~999 °C. The instrument displays with dual row 3-digit numeric tube, with a variety of RTD/TC input signal types optional with an accuracy of 0.3%; 5 sizes optional, supporting 2 alarm functions, with transmission output. Optical isolation for input terminal, output terminal, a power supply terminal, 100-240V AC/DC or 12-36V DC switching power supply, standard snap-on installation, ambient temperature at 0-50 °C, and the relative humidity of 5-85% RH (no condensation).

Terminal Assignments and Dimensions：

(1) PV display window (measured value)
(2) SV display window
In measurement state, the display is defined by dis in the level-1 parameters; in parameters setting state, it displays the set value.
(3) The first alarm (AL1) and the second alarm (AL2) indicators, running lights (OUT), A/M indicators without effect
(4) Confirm key
(5) Shift key
(6) Down key
(7) Up key

digital controller

Input signal type list:

Graduation Number Pn	Signal type	Measure range	Graduation Number Pn	Signal type	Measure range
0	TC B	100~999℃	5	TC J	0～999℃
1	TC S	0～999℃	6	TC R	0～999℃
2	TC K	0～999℃	7	TC N	0～999℃
3	TC E	0～999℃	11	RTD Cu50	-50～150℃
4	TC T	0～400℃	14	RTD Pt100	-199～650℃