Inductive conductivity electrodes are mainly used to measure conductivity and concentration values in liquid media. This product is a digital online analysis sensor that integrates measurement and com
Communication:RS485
Process pressure:≤0.5MPa
Power supply:（20~28）VDC
Power consumption:≤2W
Inductive conductivity electrodes are mainly used to measure conductivity and concentration values in liquid media. This product is a digital online analysis sensor that integrates measurement and communication with an instrument embedded inside the sensor. It directly outputs RS485 digital signals (final net data) and can realize distortion-free data transmission to industrial computers, PLCs, touch screens, etc., digitizing Sensors will be directly integrated into the Internet+ system.
| Measurement | Conductivity, concentration, TDS, temperature | |
| Model | MIK-ADE3500 | |
| Measure range | Conductivity | 500μS/cm~2000mS/cm |
| Concentration | NaOH：(0~15)% or (25~50)% | |
| HNO3：(0~25)% or (36~82)% | ||
| User-defined | ||
| Temperature | (0~50）℃ | |
| Accuracy |
Conductivity | （500～1999）μS/cm，±1.5%FS |
| （2～2000）mS/cm，±1.0% FS | ||
| Temperature | 0.5℃ | |
| Temp compensation | Compensation element | Pt1000 |
| Range | （0～120）℃ linear compensation | |
| Communication | RS485 | |
| Process pressure | ≤0.5MPa | |
| Power supply | （20~28）VDC | |
| Power consumption | ≤2W | |
| Ingress protection | Sensor：IP68 Cable interface: IP65 | |
| Working environment | Temperature：（0~50）℃ Humidity: ≤95%RH (no condensation) | |
| Storage environment | Temperature：（-20~60）℃ Humidity: ≤85%RH (no condensation) | |
| Cable length | 10m（standard)）,others customizable | |
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.
